Garmin GMX 200 Скачать руководство пользователя

Страница: 46 / 106

Page 5-12

GMX 200 Installation Manual

Revision D

190-00607-04

5.3.4 ChartView Activation

The GMX 200 can display Jeppesen charts using the optional ChartView feature, which must be

activated. This section describes how to activate the ChartView feature in the GMX 200.
1.

Turn the GMX 200 off.

NOTE

The ChartView Activation Card only can only be used on one

GMX 200. A new ChartView Activation card must be used for each

GMX 200 that has the ChartView feature activated.

Remove the database SD card from the front SD card slot and insert a ChartView Activation Card

P/N 010-00489-50.

Turn the GMX 200 on – the GMX 200 will begin activating the ChartView feature.

Wait for the message “ChartView Feature Unlocked. Please restart unit.” to appear. Turn off the

GMX 200, remove the activation card and insert the database card that was previously removed.

Turn on the GMX 200 and wait for the power up sequence to complete

Repeatedly press the

key to display the available functions. Verify that the CHART function is

now available.

5.3.5 Activation of GDL 69 XM Satellite Radio

Refer to the latest revision of 190-00355-04 for activating XM Satellite Radio.

Содержание GMX 200











































































































Результаты поиска

Содержание GMX 200

Отзывы:

Похожие инструкции для GMX 200

Бренды по названию

Популярные бренды

Garmin GMX 200, Руководство по установке

Результаты поиска

Содержание GMX 200

Отзывы:

Похожие инструкции для GMX 200

Бренды по названию

Популярные бренды