G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 192 / 240

Configuration
G&D DVI-Vision-IP-Fiber · 67
English
Configuration
The configuration of the KVM extender can be changed either using the on-screen
display (OSD) or the web application
Config Panel
:

The
OSD
is shown on the console monitor. Most configuration settings can be
changed directly on the OSD of the console.

The web application
Config Panel
provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the configurable functions of the KVM
extender. It additionally lists the default settings and references to detailed descrip-
tions of the functions.
Function Default setting Page
Operating modes of console modules OpenAccess 69
Renaming a console module 70
Renaming a target module 70
Changing your password 71
Selecting the language German 71
Changing hotkeys Ctrl 72
Changing the OSD key Num 73
Opening the OSD via double keypress turned off 74
Channel switching when using a DH computer module Cursor left, right 75
Changing the exclusive key
Print
76
Changing the time span of the input lock 1 second 77
Right for exclusive access to the console given 78
Adjusting the operating mode of the RS232 interface RS232 79
Changing the video mode of consoles always on 80
Activating a console after the permanent switch-off of the
image display
Keyboard/Mouse 81
Active console after starting an extender None 82
Selecting the EDID mode of the KVM extender auto 83
Reducing the colour depth of the image data to be transmitted 24 bit 84
Freeze mode disabled 85
Enabling or disabling DDC/CI support disabled 86
(De)Activating an USB keyboard mode the »Generic USB« mode PC Multimedia 87