G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 151 / 240

Establishing a KVM-over-IP™ connection for the first time
26 · G&D DVI-Vision-IP-Fiber
3. Select the entry Network setup and press Enter .
4. Select the entry Interfaces and press Enter .
5. Enter the following data under Main Network :
6. Press F2 to save your settings.
Configuring a KVM-over-IP connection
The IP address of the console module (host) as well as the control port of the computer
module must be specified to establish a KVM-over-IP connection through the com-
puter module.
The configuration of both the communication ports and the data ports are automatically
exchanged between the two modules.
How to configure the ports of the KVM-over-IP connection:
1. Use the local hotkey Alt + Num to open the OSD of the console module.
2. Press F11 to open the Configuration menu.
3. Select the entry KVM Connection and press Enter .
4. Enter the following data under Local :
5. Press F2 to save your settings.
Global
preferences:
Press F8 to select the global preferences:

Static: uses static settings.

DHCP: obtains settings from a DHCP server.
Hostname:
Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1: Enter the IP address of the DNS server.
DNS Server 2:
Optionally, enter the IP address of another DNS server.
NOTE:
The configuration of both the communication ports and the data ports are
automatically exchanged between the two modules.
IMPORTANT: In order to protect the configuration of the KVM-over-IP connection
from unwanted access, we recommend to activate the password protection.
Select the Password protection entry, press F8 ( on ) and then F2 to save your settings.
Control Port:
Enter the number of the port you want to use.
Communication Port: Enter the number of the port you want to use.
Data Port:
Enter the number of the port you want to use.