G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 146 / 240

Establishing a KVM-over-IP™ connection for the first time
G&D DVI-Vision-IP-Fiber · 21
English
Default setting of the modules
The default setting of the modules allows users to quickly establish a direct connec-
tion between a computer and a console module. The OSD lets you adjust the config-
uration of both modules after their initial operation.
Both the IP addresses and the
KVM-over-IP
settings are preconfigured as follows:
DEFAULT SETTING OF THE COMPUTER MODULE (CPU)
IP address Transmission: 172.17.0.10
Netmask 255.255.0.0
Control port: 18246
Communication port: 18245
Data port: 18244
DEFAULT SETTING OF THE CONSOLE MODULE (CON)
IP address Transmission: 172.17.0.11
Netmask 255.255.0.0
Local control port: 18246
Local communication port: 18245
Local data port: 18244
Remote host: 172.17.0.10
Remote control port: 18246
NOTE: The
IP address
of the computer module (host) as well as the
control port
of the
computer module must be specified to establish a
KVM-over-IP
connection through
the console module.
The configuration of both the
communication ports
and the
data ports
are automati-
cally exchanged between the two modules.