G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 138 / 240

Installation
G&D DVI-Vision-IP-Fiber · 13
English
Mouse: Connect the PS/2 mouse of the console.
Keyb.:
Connect the PS/2 keyboard of the console.
Connecting the console monitor
DVI/VGA Out: Connect the console monitor.
If the monitor provides an
analogue
VGA input only, use an optional adapter to con-
nect to this interface. Now connect the VGA cable of the monitor to the adapter.
Connecting audio and RS232 interfaces
Micro In: If required, connect a microphone to this interface.
Speaker: Connect the speakers or another audio output device.
RS232: Connect the serial end device to this interface.
IMPORTANT: This product allows simultaneous use of up to three GenericUSB
devices via a console module. For this, both the used console module and the
used computer module must support the us of up to three GenericUSB devices.
For this purpose, UG variants of the compatible VisionXS-IP series are available.
NOTE: There is
one Generic
interface on the console module. You need a USB hub
or a USB composite device to connect
two
or
three
GenericUSB devices.
The two
Keyb./Mouse
interfaces cannot be used for
generic USB
mode.
,