G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 219 / 240

Configuration
94 · G&D DVI-Vision-IP-Fiber
Resetting the default settings
This function is used to reset the default settings of the KVM extender. By perform-
ing this function, the default settings mentioned on page 67 are reactivated.
How to reset the default settings:
NOTE: Open the local OSD of the console module by pressing the local hotkey
( default : Alt + Num ) if you want to reset the local settings of the console module only
instead of the settings of the extender system.
OSD
1. Open the remote OSD of the computer module by pressing remote hotkey
( default : Ctrl + Num ) if you want to reset the settings of the extender system.
Open the local OSD of the console module by pressing the local hotkey ( default :
Alt + Num ) if you want to reset the local settings of the console module.
2. Select the row System setup (remote OSD) or Console utility
(local OSD) and press Enter .
3. Select the row Set system defauts and press Enter .
4. Confirm the security prompt or cancel the process.
NOTE: You can also reset the default settings by pressing the Reset keys.
Further information about this topic is given on page 18.