G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 135 / 240

Installation
10 · G&D DVI-Vision-IP-Fiber
Optional: Connecting a local console
Keyb./Mouse: Connect the mouse and/or the keyboard of the local console to this
interface.
DVI/VGA Out:
Connect the monitor of the local console to this interface.
If the monitor provides an analogue VGA input only, use an optional adapter to
connect to this interface. Now connect the VGA cable of the monitor to the adapter.
Establishing a connection to the Gigabit Ethernet
Transmission|Tx:
Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission|Rx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
NOTE: The keyboard of the local console can either be a PS/2 or a USB device.
ADVICE: Use the adapter MD6M-2xMD6F (A6400043) to use a PS/2 keyboard and a
USB mouse at the same time.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and from the
cable plug.