G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 220 / 240

Configuration
G&D DVI-Vision-IP-Fiber · 95
English
Resetting the netfilter rules
In the
default
settings, all network computers can access the system’s IP address
(open system access).
With the
Config Panel
web application, you can create netfilter rules to control the
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
OSD
1. Open the remote OSD of the computer module by pressing
remote hotkey
(
default
:
Ctrl
+
Num
) if you want to reset the settings of the extender system.
Open the local OSD of the console module by pressing the
local hotkey
(
default
:
Alt
+
Num
) if you want to reset the local settings of the console mod-
ule.
2. Select the row
Network
and press
Enter
.
3. Select the row
Reset netfilter configuration
and press
Enter
.
4. Confirm the security prompt or cancel the process.