G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 227 / 240

Further information
102 · G&D DVI-Vision-IP-Fiber
Determining network settings via service port
If you do not know the IP address of an already configured user or computer mod-
ule, you can use the service port of the module to find out the address.
Use any terminal emulator (e.g. Tera Term or PuTTY ) to show the log messages of
the modules.
Installing the device driver
Before establishing a connection using the terminal emulator, install the device
driver CP210x USB to UART Bridge VCP .
How to install the device driver to address the service port:
1. Use any web browser to open the website www.gdsys.com/en/start .
2. Go to More from G&D > Tools & Driver .
3. Download the device driver for the operating system installed on the computetr.
4. Execute the file and follow the instructions of the installation wizard.
NOTE:
When connected to a service cable, the driver provides the Service port of a
user or a computer module as a virtual serial interface (COM port). The virtual
interface can then be selected to establish a connection using the terminal emula-
tor.