G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 205 / 240

Configuration
80 · G&D DVI-Vision-IP-Fiber
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also specify that the image of the other console is temporarily or permanently
switched off as soon as an entry is made at a console.
How to select the video mode of a console:
Related topics:
 Changing the time span of the input lock on page 77

Right for exclusive access to the console on page 78
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row Console setup and press Enter if you want to adjust the video
mode for the remote console (at the CON module).
Select the row Local console setup and press Enter if you want to adjust the
video mode for the local console (at the CPU module).
3. Under Video mode press F8 to select one of the following options:
always on  The computer screen is displayed on both the
monitor of the active and the monitor of the
concurrent console ( default ).
switch off  The screen of this console (depending on the selection
made in step 2) is temporarily switched off whenever an
entry is made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, the screen is automatically switched on again.
keep off  The screen of this console (depending on the selection
made in step 2) is s witched off permanently if an entry is
made on the concurrent console.
After the time period of the input lock (see below) has
elapsed, you need to make an entry on this console to
switch on the screen again.
4. Press F2 to save your settings.