G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 200 / 240

Configuration
G&D DVI-Vision-IP-Fiber · 75
English
Channel switching when using a DH computer module
You can use a console module of the
DVI-Vision-IP
series in combination with a DH
variant of a computer module of the
VisionXS-IP
series.
To display the image of the second video output of the computer at the console, you
have the possiblity to switch between the video channels.
The key combination for channel switching consists of at least one modifier key (see
Changing hotkeys on page 72) and additional Select stream keys. Both the modifier key
and the Select stream keys can be changed.
How to change the Select stream keys:
NOTE: The DH variants allow the transmission of two separate video signals via
one transmission cable.
OSD
1. Press Alt+Num ( default ) to open the OSD of the console module.
2. Press F11 .
3. Select the row Hotkeys and press Enter .
4. Under Select stream select one of the following options:
Cursor left, right  Cursor left key and Cursor right key ( Standard )
Num+, Num-  Num+ -key and Num- key
5. Press F2 to save your settings.