FULTON ModSync SE, Руководство пользователя

Страница: 13 / 79

Questions? Please Contact Your Local Manufacturer’s Representative
2-5
SECTION 2
ModSyncSE-User-Manual-211020
INSTALLATION
!
WARNING
This manual is provided as a
guide to the correct operation and
maintenance of your equipment,
and should be read in its entirety and
be made permanently available to
the staff responsible for equipment
operation. It should not, however
be considered as a complete code
of practice, nor should it replace
existing codes or standards which
may be applicable. Fulton reserves
the right to change any part of
this installation, operation and
maintenance manual without notice.
Do not install, operate, service,
or repair any component of this
equipment unless you are qualified
and fully understand all requirements
and procedures.
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional /professional codes or
regulations
ƒ
Analog Inputs
All analog inputs are 4-20 mA. Analog inputs are wired directly to the analog
input module. Every two inputs share a common. Options for Analog Inputs
include:
ƒ Individual Boiler Outlet Temperatures
ƒ
Supply Pressure Input
ƒ
Return Pressure Input
ƒ
Differential Pressure Input
ƒ
Analog Outputs
All analog outputs are 4-20 mA. Options for Analog Outputs include:
ƒ
Individual Boiler Circulator Pump VFD Speed
ƒ
Individual System Pump VFD Speed
ƒ
Individual Boiler Firing Rate