Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 99 / 349

6-9
Chapter 6 Admit/Discharge Data Transfer Function

When a Patient is Discharged from the EMR
When a patient is discharged from the EMR, "Discharged on EMR" icon will be displayed on the home display.
On the "Admit/Discharge" screen, the [Discharge] key will become effective to allow discharging the patient.
1
Press the [Discharge] key on the "Admit/Discharge" screen.
Data Transfer Function
By using the data transfer function, the patient information, and settings can be transferred to other monitor by
transferring the transport monitor (DS-8007).
While transferring, the review data of up to 24 hours (max. 5 waveforms) can be uploaded to the central monitor and
transmitted to the data server.
NOTE

To use the data transfer function, select [ON] for "Data Transfer" under [Initial
Settings>System>Other]. (

Maintenance Manual "Data Server" P2-22)
 Multiple upload process cannot be performed simultaneously within one DS-LAN network.
The data will be uploaded one at a time in the order of starting time of transfer.
CAUTION
 During transferring the patient, do not discharge the patient on the transport monitor.
 While uploading the review data, <Uploading> will be displayed on the central monitor, and
<Uploading Data> will be displayed on the host monitor. While uploading, do not disconnect
the transport monitor, or turn OFF the power of the host monitor and central monitor.
 The review data can be transferred only on the DS-LAN III network. On the wireless and
TCON network, the review data cannot be transferred.
 If the data of the past patient remains on the transport monitor, the review data of the
unintended patient may be erroneously uploaded. When the monitoring patient is changed,
make sure to discharge the previous patient.On the bedside monitor, it is recommended to
set [ON] for "Check Discharge at Power ON" under [Initial Settings].