Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 24 / 349

iv
Safety Precautions about the Network System

Precaution when Equipment Failure Occurs

If the equipment is damaged and in need of repair, the user should not attempt service. Label the unit "OUT
OF ORDER" and contact our service representative.

Precaution about Disassembling/Remodeling the Equipment
 Do not disassemble or remodel the equipment.

Precautions about Maintenance Check
 Make sure to periodically check the equipment, accessories and cables.

When reusing the equipment which was left unused for a while, always check that the equipment operates
properly and safely before use.
Maintenance
 Never open the housing while the equipment is in operation or connected to hospital grade outlet as it may
result in electric shock.
Precautions about Safety Check
 For safe operation of the equipment, regular inspection and maintenance are required. Once a year, check all
cables, devices, and accessories for damage, earth impedance, earth and leakage currents, and all alarm
functions. Also, ensure that all safety labels are legible. Maintain a record of these safety inspections.
 Immediate maintenance has to be carried out for the following case.
 When the equipment was subjected to extreme mechanical stress, e.g. after a heavy fall.
 When the equipment was subjected to liquid spill.
 When the monitoring function is interrupted or disturbed.
 When parts of the equipment enclosure are cracked, removed, or lost.
 When any connector or cable shows signs of deterioration.
Precautions about the Network System
Medical Telemetry
Precautions about the Installation
 The medical institution (hereinafter referred as "Institution" ) must decide the telemetry installation plan for
the medical institution in order to prevent interference between transmitters (telemetry based on destination
country's radio law). When telemetry has already been installed and been used, radio format, frequency, and
antenna power are required to be examined to prevent interference.
 When using telemetry which requires zone location, the institution is to set up the zones as an operation unit
for each transmitter to prevent electronic interference between telemetry throughout the Institution.
 When using telemetry which requires zone location, display and identify each prepared zone in the equipment.
 When laying receiver antenna for each transmitter, the Institution has to examine the installation so that
electronic interference does not occur.
 Based on the above examination result, the Institution should place each receiver antenna as required.
WARNING
CAUTION
CAUTION