Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 182 / 349

9-16
Chapter 9 Data Review Recall
divider interval.
 By releasing the drag operation, a divider interval, [Multiple], [Cancel] keys will be displayed again.
3
[Multiple] Key Operation
1
Clicking the [Multiple] key will continuously display the dividers in equal intervals before and after the
current divider.
 The divider interval (mm) will be displayed at the center of QRS judgment display area.

If the divider interval is less than 5 mm, the [Multiple] key will not function.
2
To adjust the divider lines after they are finalized, use the square marks on the divider lines.

By dragging the square marks on the upper/lower end of the divider line, the divider interval from the
previous divider line can be decreased/increased.
 By using the square marks on the center, the start line and end line can be dragged at the same time
without changing the divider interval.
 By releasing the drag operation, a divider interval, [Multiple], [Cancel] keys will be displayed again.
4
When the enlarged waveform is printed during the divider mode, the divider lines will be also printed.
5
The divider mode will be cancelled for the following cases.
 When the display is switched to other display

When the display is switched to other patient
 When the [Cancel] key is clicked
NOTE
 The data resolution of the divider is 0.3 mm. Adjustment of less than 0.3 mm is not
possible.