Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 301 / 349

15-3
Chapter 15 Setup Item/Default Value Parameter Setup

NIBP

BP1 to 8

TEMP1 to 8

CO
2

Ventilator
Item Description Default
Setting at
Discharge
NIBP Periodic Measurement OFF, Interval, Timer OFF Default
Measurement Interval 2min, 2.5min, 3min, 5min, 10min, 15min, 20min,
30min, 60min, 120min 120 min
No Change
Timer 00:00 to 23:00 No Selection No Change
Patient Classification *Same with "Patient Admit/Discharge" section.
PR ON, OFF OFF No Change
MAP ON, OFF ON No Change
Time Display Elapsed, Meas. Elapsed No Change
Item Description Default
Setting at
Discharge
Scale
*
20, 50, 75, 100, 150, 200, 250, 300mmHg 200mmHg
Default
4, 8, 12, 16, 20, 24, 32, 40kPa 24kPa
Synchronized Mark/Tone *Same with selection for ECG Setup.
Display Type S/M/D, S/D, M S/M/D No Change
*: The scale selection will differ depending on the label.
Item Description Default
Setting at
Discharge
Label T#, Tsk, Tre, Tes, Tco, US1 to US7 T* (T1 to T8) No Change
Item Description Default
Setting at
Discharge
Unit mmHg, kPa, % mmHg No Change
Scale 0-50, 0-100mmHg 0 to 50mmHg
Default 0-4, 0-8, 0-10kPa 0-4kPa
0-4, 0-8, 0-10% 0-4%
Item Description Default
Setting at
Discharge
AWP Scale 10, 20, 30, 50, 120cmH
2
O 50cmH
2
O
Default AWF Scale ±5, ±10, ±20, ±50, ±180L/min ±50L/min
AWV Scale 50, 250, 500, 1000, 3000mL 500mL