Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 225 / 349

12-13
Chapter 12 Printing To Start/Stop the Printing

Remote Printing from the Telemetry Transmitter (LX-5120, LX-5230, LX-7120, LX-7230)
1
Press the event key for more than 3 seconds on the LX-5120, LX-5230, and for more than 2 seconds for the
LX-7120, LX-7230.
 Printing will be performed on the recorder unit of the central monitor.
 The print duration and delay time is fixed as 24 seconds and 12 seconds respectively.
 The waveform selection will be according to the manual printing setup on the central monitor (this unit).
NOTE
 Select [ON] for "LX Remote Printing" (Menu > Initial Settings > User I/F > Display/Print).
(

Maintenance Manual "Display/Print" P7-12)
Example of Telemetry Remote Printing
The measurement value at the beginning of the waveform (at the bed ID, channel ID display area) will be printed.
Review Data Printing
The review data such as graphic trend, tabular trend, NIBP list, recall waveform, ST waveform can be printed.
The review data can be printed by pressing the [Print] key displayed on each review data screen.
NOTE
 When using a laser printer, printing cannot be performed if the stacked data reaches the
maximum quantity.

When using a laser printer, pressing the [Print] key during printing will not stop the printing.