Fukuda DYASCOPE 8000 Series, Руководство по эксплуатации

Страница: 222 / 349

12-10
Chapter 12 Printing To Start/Stop the Printing
To Start/Stop the Printing
Manual Printing

Operation from the Home Display
1
Press the (Print) key. To stop the printing, press the (Print) key again for the same bed.
REFERENCE
 Pressing the (Print) keys for more than one bed will sequentially start the
printing for the pressed beds. However, [12 sec.] or [24 sec.] should be selected for "Print
Duration" under [Manual Printing].

Operation from the User Key for Individual Bed
1
Assign [Print Start/Stop] key to the user key for the individual bed.
(

Maintenance Manual "User Key" P7-20)
2
Press the [Print Start/Stop] key.
 Printing will start.

Operation from the User Key for All Beds
NOTE
 Using this procedure will start the printing for all beds displayed on the home display.

The printing duration is 12 seconds and the delay time is 8 seconds for all beds.
1
Assign [Print All Beds] to the user key for all beds.
(

Maintenance Manual "User Key" P7-20)
2
Press the [Print All Beds] key.
 Printing will start.