Fukuda Denshi DS-8200, Руководство по обслуживанию

Страница: 171 / 219

Test Menu Items
Test Menu Items Description
MAINTENANCE
The hardware information of the equipment can be checked
on this display. For details, refer to the section on
“Maintenance”.
MAINTENANCE (HS-8000)
The hardware information of the equipment can be checked
on this display. For details, refer to “Chapter 9 Maintenance” of
“Super Unit HS-8000 Series Service Manual”.
MAINTENANCE (LAN)
The hardware information of the equipment can be checked
on this display. For details, refer to the section on
“Maintenance (LAN)”.
MAINTENANCE (Battery)
The battery information of the equipment can be checked on
this display. For details, refer to the section on “Maintenance
(Battery)”.
MAINTENANCE (SpO
2
)
Displays the status of SpO
2
measurement module. For details,
refer to “Chapter 9 Maintenance” of “Super Unit HS-8000
Series Service Manual”.
MAINTENANCE CO
2
Displays the status of CO
2
measurement module. It will be
displayed only when HCP-800/810 or HPD-800/810 is used.
For details, refer to “Chapter 9 Maintenance” of “Super Unit
HS-8000 Series Service Manual”.
CF/SD Cards
Formats, saves and restores the data of the CF/SD cards.
For details, refer to the section on “CF/SD Cards”.
EEPROM
Checks the EEPROM data such as equipment information and
operating time. For details, refer to the section on “EEPROM”.
EEPROM (HS-8000)
Checks the EEPROM data such as equipment information and
operating time. For details, refer to “Chapter 9 Maintenance” of
“Super Unit HS-8000 Series Service Manual”.
TOUCH PANEL ADJUSTMENT
Readjusts if the touch panel is misarigned.
Touch panel calibration will be performed.
For details, refer to the section on “Touch Panel Adjustment”.
TOUCH PANEL
Checks the touch panel key input.
For details, refer to the section on “Touch Panel”.
RTC Setup
This is the factory initial setting. Normally, do not press this
key.
Set the time to the reference clock of the main unit.
The normal time setting should be performed in the following
order. [Menu]
→ [Basic Setup] → [Time]
Be careful, if this time is changed, unlike Clock Setup,
operation integrated time and recording time of trend or recall
will be thoroughly changed.
Set up RTC only when the Lithium Battery, RTC, or CPU
board is replaced.
Normally, this will not set up after factory setup.
Make sure to initialize the system and operation time of
EEPROM after setup.
VIDEO I/F
Displays various patterns of test screen to check the LCD
operation. For details, refer to the section on “Video I/F”.
TCON Sens. Adjustment (
Only
for USA)
Adjusts the TCON reception sensitivity with the”+” or”-” key.
Operation History
Displays the last 2048 operations.
10-5