Fukuda Denshi DS-8200, Руководство по обслуживанию

Страница: 12 / 219

Symbol Description
This icon (1/3 yellow) indicates that the battery is low and needs to
be charged.
This icon (1/3 red) indicates that the battery is very low and flashes
to alert the low battery status.
Immediate battery charge is required.
Technical alarm will generate.
This icon (red frame) indicates that the battery is very low and it
flashes for alert to charge. Make sure to charge the battery at the
point when this icon appears.
The remaining operable time is about 5 minutes.
The remaining operable time is based on when measurement of
NIBP 15 minutes interval, ECG, SpO
2
is performed with a new
battery pack. It will vary depending on the optional unit composition,
NIBP measurement interval, recorder operating condition, etc.
This icon (black frame with a slash) indicates that the battery is not
installed. Pay attention as power will not be supplied if AC power
cable is disconnected during this state.
Precautions for Safe Operation of Medical Electrical Equipment
C A U T I O N
z Users should have a thorough knowledge of the operation before using this
equipment.
z
Precautions about the Location of Installation and Storage of the Equipment
y Set the monitor to the user's intended position where the user can easily
recognize the visual and audible monitoring conditions. Normally it is
recommended to set at a distance of 1m from the user.
y Install or store in a place where the equipment will not be exposed to
splashing water.
y Install or store in a place where the equipment will not be adversely affected
by atmospheric pressure, temperature, humidity, ventilation, sunlight, dust
or atmosphere containing salt or sulfur.
y Place the equipment on a stable surface where there is no inclination,
vibration, or shock (including during transportation).
y Do not install or store in an area where chemicals are stored or gasses are
evolved.
y Verify the power frequency, voltage and allowable current (or power
consumption).
y Ensure the grounding is proper by connecting the accompanying power
cable to the hospital grade outlet.
z Precautions Before Using the Equipment
y Verify the power voltage. Charge the battery pack fully before operating the
system with the battery pack.
y Check the cable connection and polarity to ensure proper operation of the
equipment.
y Make sure the power system has adequate earth ground.
y Ensure that all cables are firmly and safely connected.
y Pay special attention when the equipment is used in conjunction with other
equipment as it may cause erroneous diagnosis and danger.
viii