Cleaning the Inside of the ScanSnap
427
z
Pad assy (× 1, located on the ADF top section)
Gently wipe the rubber pads downwards. Be careful not to get your hand or the cloth
caught on the pick spring (metal part).
z
Glass (× 2, one on the ADF top section and one on its opposite side)
Gently wipe the dirt and dust off the surface of the glass sections.
z
Ultrasonic sensor (× 2, one on the ADF top section and one on its opposite side)
Gently wipe the dirt and dust off the surface of the ultrasonic sensors.
z
Pick roller (× 1)
Gently wipe the dirt and dust off the roller as you rotate it manually. Be careful not to
damage the surface of the rollers. Make sure that it is cleaned properly because
residue on the roller will affect the feeding performance.
z
Idler roller (× 4, located on the ADF top section)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful
not to damage the surface of the rollers. Make sure that it is cleaned properly
because residue on the roller will affect the feeding performance.
4.
Connect the power cable, and press the [Scan] button for 3 seconds with
the ADF top section open.
Connect the power cable only when cleaning the feed rollers and eject rollers.
