Actions (for Windows Users)
165
3.
Change the settings for [Scan to Rack2-Filer] (If you do not want to
change any settings, go to step
1. Click the [Application Settings] button.
D
The [ScanSnap - > Rack2] dialog box appears.
2. Change the settings.
In this dialog box, specify the destination to save the scanned image.
For details about the [ScanSnap - > Rack2] dialog box, refer to Rack2-Filer Help.
Click the [Help] button in the [ScanSnap - > Rack2] dialog box to display Rack2-Filer
Help.
3. Click the [OK] button to close the [ScanSnap -> Rack2] dialog box.
4.
Click the [OK] button to close the ScanSnap setup dialog box.
5.
Load a document in the ScanSnap.
For details about how to load documents, refer to
"How to Load Documents" (page 32)
.
