manualshive.com logo in svg

Fujitsu FR Family FR60 Lite, Руководство пользователя

Продукт Fujitsu FR Family FR60 Lite - это компактный и эффективный прибор для печати. Пользователи могут легко настроить его благодаря подробному руководству по эксплуатации, которое можно бесплатно скачать с manualshive.com. Уверенно знайте, как использовать этот принтер для офиса или дома.

Поделиться
Скачать
background image

961

Chapter 49  Real-Time Clock

8.Caution

8.  Caution

• Setting the interrupt request flags (WTCR.INT0, WTCR.INT1, WTCR.INT2, WTCR.INT4 and WTCER.INT4)

to “1” due to overflow, and writing “0” to that bit have occurred at the same time, the flag is set to “1”. (Flag
setting takes precedence.)

• Writing “1” to the update bit (ETCR.UPDT) and update completion have occurred at the same time, the

update bit (UPDT) is set to “0”.

• When the second counter holds the value of 59, even if “1” is written to the update bit (WTCR.UPDT), the

hour/minute/second counters are not updated, leaving the update bit to remain “0”.
In order to update the hour/minute/second counters, it is recommended that “0” should be written to the start
bit (WTCR.ST), the hour/minute/second counters be cleared to “0”, and then “1” be written to the start bit
(ST).

• If you stop the peripheral clock (CLKP) after updating the hour/minute/second counters using the update bit

(WTCR.UPDT), read the hour/minute/second registers to confirm that they have been updated before
stopping the peripheral clock.

• When you start to use the Real-time Clock module, change the start bit (ST) from “1” to “0”, and clear the

hour/minute/second counters and the 21 bit down counter to “0”.

• The Sub-second register of the RTC module stores the reload value for the 21bit prescaler. This value is

reloaded after the reload counter reaches "0". When modifying all three bytes, make sure the reload
operation will not be performed in between the write instructions. Otherwise the 21-bit prescaler loads the
incorrect value of the combination of new data and old data bytes. It is generally recommended that the Sub-
Second register is updated while the ST bit is "0".

However, if this update is done immediately after an RTC second interrupt there should be enough time to

securely modify the registers until the next reload operation (next second interrupt) even if ST is not set to
"0" and the module is in operation.

When updating the registers by using the ST bit the following must be taken into account:

The new value is written into the registers with the rising edge of the RUN bit. This RUN bit is clocked by the

RTC clock (32 kHz, 100kHz or 4 MHz depending on device and mode). To make sure that the update is
done properly, write the new values into the registers, set ST to 0, wait for the RUN bit to go low and then
start the circuit again by setting ST to 1. RUN will go low at the second rising edge of the RTC clock after ST
has been set to 0. It will rise again at the half second rising edge of RTC clock after ST has been set to 1. If
this operation is to be done several times directly after each other, wait for RUN to go to high before setting
ST to low again.

• If a reload has occurred during updating the sub-second registers, WTBR0 to WTBR2, an unexpected value

may be reloaded to the 21 bit down counter. Therefore, it is recommended that the sub-second register,
WTBR, should be updated with the start bit (WTCR.ST) set to “0”.

• If all the sub-second registers, WTBR0 to WTBR2, are set to “0”, the 21 bit down counter does not operate,

resulting in the Real-time Clock module to be inoperational.

• If a carry has occurred during reading from the hour/minute/second registers, WTHR/WTMR/WTSR,

inappropriate values may be read. To avoid this, it is recommended that interrupts (INT0-4) should be used
to read time (HH/MM/SS).

• In order for the Real-time Clock module to function properly, the frequency of the subclock must be much

Содержание FR Family FR60 Lite















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FR Family FR60 Lite

D-Link WUA-1340 Manual preview
WUA-1340
Бренд: D-Link Страницы: 43
Tripp Lite U209-004 Brochure preview
U209-004
Бренд: Tripp Lite Страницы: 4
Alpine KCX-422TR User Manual preview
KCX-422TR
Бренд: Alpine Страницы: 3
Alpine KCE-400BT Owner'S Manual preview
KCE-400BT
Бренд: Alpine Страницы: 156
NETGEAR XAVB5501 Installation Manual preview
XAVB5501
Бренд: NETGEAR Страницы: 2
Icy Box IB-AC514 Manual preview
IB-AC514
Бренд: Icy Box Страницы: 12
Icy Box IB-RPA100 Quick Installation Manual preview
IB-RPA100
Бренд: Icy Box Страницы: 16
ICS N4865A Instruction Manual preview
N4865A
Бренд: ICS Страницы: 100
Louroe Electronics IF-1 Installation And Operating Instructions Manual preview
IF-1
Бренд: Louroe Electronics Страницы: 8
DigiPower AC-SPS90 User Manual preview
AC-SPS90
Бренд: DigiPower Страницы: 12
Compaq Pavilion zt3000 - Notebook PC Using Manual preview
Pavilion zt3000 - Notebook PC
Бренд: Compaq Страницы: 10
Sandberg 133-42 Manual preview
133-42
Бренд: Sandberg Страницы: 12
Mitel 6800 Series Installation Manual preview
6800 Series
Бренд: Mitel Страницы: 21
Mitel TA7108 Hardware Installation preview
TA7108
Бренд: Mitel Страницы: 30
Belkin F5U015-TPW Manual preview
F5U015-TPW
Бренд: Belkin Страницы: 17
Trusted Link BLE010V2 User Manual preview
BLE010V2
Бренд: Trusted Link Страницы: 13
Techly IPW-USB-21AMBK Quick Start Manual preview
IPW-USB-21AMBK
Бренд: Techly Страницы: 2
Techly IADAP USB31-HDMI User Manual preview
IADAP USB31-HDMI
Бренд: Techly Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды