manualshive.com logo in svg

Fujitsu FR Family FR60 Lite, Руководство пользователя

Продукт Fujitsu FR Family FR60 Lite - это компактный и эффективный прибор для печати. Пользователи могут легко настроить его благодаря подробному руководству по эксплуатации, которое можно бесплатно скачать с manualshive.com. Уверенно знайте, как использовать этот принтер для офиса или дома.

Поделиться
Скачать
background image

579

Chapter 31  External Bus

8.Prefetch Operation

8.  Prefetch Operation

This section explains the prefetch operation.

■

Prefetch Operation

The external bus interface controller contains a prefetch buffer consisting of 16 x 8 bits.

If the PSUS bit of the TCR register is 0 and read access to an area to which the PFEN bit of the ACR register is
set to 1 occurs, the subsequent address is prefetched and then stored in the prefetch buffer.

If the stored address is accessed from the internal bus, the lookahead data in the prefetch buffer is returned
without external access being performed. This can reduce the wait time for successive accesses to the external
bus areas.

●

Basic conditions for starting external access using prefetch

External bus access using prefetch occurs when the following conditions are met:

•

The PSUS bit of the TCR register is 0.

•

Neither sleep mode nor stop mode is set.

•

Read access by the external bus to a chip select area for which prefetch is enabled has been performed.
DMA access and read access by a read modified write system instruction, however, are excluded.

•

No external bus access request (external bus area access to an area for which prefetch is not enabled or DMA
transfer with an external bus area) other than the prefetch access has occurred.

•

The part of the prefetch buffer for the next operation of capturing the  prefetch access is completely empty.

While the above conditions are met, the prefetch access will continue. If external bus area access to an area for
which prefetch is not enabled occurs after prefetch access, prefetch access to the area for which prefetch is
enabled will continue as long as the prefetch buffer clear conditions are not met.

For an access that mixes multiple prefetch-enabled areas and multiple prefetch-disabled areas, the prefetch
buffer always holds data of the prefetch-enabled area accessed last. Since, in this case, access to prefetch-
disabled areas does not affect the prefetch buffer state at all, data in the prefetch buffer is not wasted even if
prefetch-disabled data access and prefetch-enabled instruction fetch are mixed.

●

Optional clear for temporary stopping of a prefetch access

Setting 1 for the PSUS bit of the TCR register temporarily stops a prefetch. The prefetch can be restarted by
setting the PSUS bit to 0. At this point, the contents of the buffer are retained if no error occurs or a buffer clear
such as occurs when the PCLR bit is set does not occur.

Setting 1 for the PCLR bit of the TCR register completely clears the prefetch buffer. Clear the buffer by setting
the PSUS bit when prefetch is interrupted.

Prefetch is temporarily stopped for the minimum unit (64 KB) of the boundary=chip select area where the high-
order 16 bits of an address change. If the boundary is crossed, first a buffer read error occurs and then prefetch
starts in a new area.

●

Unit for one prefetch access operation

The unit for one prefetch access operation is determined by the DBW bits (bus width) and BST bits (burst length).

Prefetch access always occurs with the full size of the bus width specified by the DBW bits and access for the
count of the burst length set by the BST bits in one access operation is performed. That is, if any value other
than 00

B

is set for the BST bits, the prefetch always occurs in page mode/burst mode. Keep in mind whether

ROM/RAM is conformable and enough access time is applicable. (Set an appropriate value bits W15-08 bits of
the AWR register).

Содержание FR Family FR60 Lite















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FR Family FR60 Lite

3Com 3CRWE62092B - 11Mbps Wireless LAN PC Card User Manual preview
3CRWE62092B - 11Mbps Wireless LAN PC Card
Бренд: 3Com Страницы: 16
Cabletron Systems SmartSwitch 6C110 Installation Instructions Manual preview
SmartSwitch 6C110
Бренд: Cabletron Systems Страницы: 7
cable matters 201085 User Manual preview
201085
Бренд: cable matters Страницы: 52
Targus ACA958USZ User Manual preview
ACA958USZ
Бренд: Targus Страницы: 8
Grandstream Networks HT818 Administration Manual preview
HT818
Бренд: Grandstream Networks Страницы: 75
TRENDnet TEW-647GA Quick Installation Manual preview
TEW-647GA
Бренд: TRENDnet Страницы: 28
DeLOCK 64074 User Manual preview
64074
Бренд: DeLOCK Страницы: 16
Inteltronic WL-BUI112-10I Spec Sheet preview
WL-BUI112-10I
Бренд: Inteltronic Страницы: 1
Akitio Thunder2 Quad Setup Manual preview
Thunder2 Quad
Бренд: Akitio Страницы: 8
Sailor AT2112 Technical Manual preview
AT2112
Бренд: Sailor Страницы: 25
Planet WL-U356A Quick Installation Manual preview
WL-U356A
Бренд: Planet Страницы: 2
Lindy 43197 User Manual preview
43197
Бренд: Lindy Страницы: 2
B&B Electronics Quatech SSP-100 User Manual preview
Quatech SSP-100
Бренд: B&B Electronics Страницы: 40
TRENDnet TU3-ETG User Manual preview
TU3-ETG
Бренд: TRENDnet Страницы: 18
Asus USB-AC51 User Manual preview
USB-AC51
Бренд: Asus Страницы: 26
Asus USB-AC50 User Manual preview
USB-AC50
Бренд: Asus Страницы: 36
Asus USB-AC53 Quick Start Manual preview
USB-AC53
Бренд: Asus Страницы: 2
Amprobe AT-1000 User Manual preview
AT-1000
Бренд: Amprobe Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды