FujiFilm SONOSITE X-PORTE, Руководство пользователя

Страница: 110 / 366

4-34 Imaging
The following table shows the parameters used for worklist queries. You set parameters on the worklist
configuration page (see
“DICOM” on page 3-13).
To manually update the worklist
1 On the patient form, tap Worklist .
2 Tap Update .
To perform a manual query
1 On a new patient form, do any of the following:

Fill in any of the following fields for the query: Last , First , Middle , Accession , or ID .
The query is on the characters you enter. For example, Smith returns Smith, Smithson, Smithy .

Under Additional Worklist Query Parameters , specify any of the following:

Modality Select a procedure type from the list. US (Ultrasound) is the default.

Requested Procedure ID Type a procedure ID.
2 Tap Query .
The worklist appears with the query results. The number of results is in the lower right screen. The time
of the last query appears below the worklist.
3 Highlight the patient procedure you want, and then tap Select .
The system imports the information into the patient form.
Table 4-8: Query parameters
Manual Patient
Query
Manual Update from
Worklist
Automatic Query
Update
Patient Data
Date Range
This Device Only
Automatic Query On/Off
Occurs Every
Start Time