FujiFilm SONOSITE X-PORTE, Руководство пользователя

Страница: 142 / 366

5-14 Measurements and calculations
2 On the calculation list, tap Volume Flow .
Steps 3 and 4 can be done in either order.
3 Measure blood vessel diameter:
a On a frozen 2D image, on the Volume Flow menu, tap Diam .
b Position the calipers by dragging.
c Tap to save the measurement.
4 Calculate the blood velocity.
a On a frozen Doppler trace, on the Volume Flow menu, tap TAP (peak). To use a different velocity
measurement, tap , and then choose either Mean or Manual .
b For Manual , trace the waveform by dragging the calipers.
To make a correction, trace backward on the dotted line.
c For Peak or Mean , position the vertical calipers by dragging.
d Tap to save the measurement.
5 Tap WORKSHEET to view the results.
Arterial calculations
The Arterial calculations that you can perform are listed in Table 5-3 on page 5-15.
In the Arterial exam, you can also calculate ICA/CCA ratio, volume, volume flow, and percent reduction. See
“Volume calculation” on page 5-12, “Volume flow calculation” on page 5-12, and “Percent reduction
calculations” on page 5-11.
WARNINGS

To avoid incorrect calculations, verify that the patient information, date, and
time settings are accurate.

To avoid misdiagnosis or harming the patient outcome, start a new patient
form before starting a new patient exam and performing calculations. Starting
a new patient form clears the previous patient’s data. The previous patient’s
data will be combined with the current patient if the form is not first cleared.
See “Entering patient information” on page 4-31.