11 Problem Solving
166
Pr
o
b
lem S
o
lving
11
Error Code
If an error caused printing to end abnormally, or a malfunction occurred in the machine,
then an error message code (
∗∗∗
-
∗∗∗
) is displayed.
If an Error code appears, refer to "Error Code" under "14 Problem Solving" in the
Administrator Guide.
Error codes for fax are written also in job status/activity reports and unsent reports.
For information on job status/activity reports and transmission reports (undelivered), refer to "5
Machine Status" > "Billing Meter/Print Report" > "Print Report/List" in the Administrator Guide and
"Report / Read Receipts (Confirming Transmission Results)" (P.56) respectively.
The received one-page
document is split into
multiple pages.
Cause When scanned on the sender's machine, the document was
enlarged for some reason.
No
Action This machine can process such a document using the Auto%
Receiving feature and a border limit value for page split.
According to the setting combination, the received document is
printed as follows.
Refer to "Border Limit" (P.113), or "Auto Reduce On Receipt"
(P.113).
The mailbox selector
feature is set, however, the
received document is
printed, and cannot be
stored in the mailbox.
Cause The unregistered mailbox is specified on the mailbox selector
feature.
Action When using the mailbox selector feature, specify the
registered mailbox. If the unregistered mailbox is selected, the
received document cannot be stored in the mailbox, and will
be automatically printed.
For information on how to register the mailbox, refer to "6 System
Settings" > "Setpu Menu" > "Mailbox" in the Administrator Guide.
For information on the mailbox selector, refer to "File Destination/
Output Destination" (P.115).
Auto Reduce on
Receipt
Page split
Border Limit
Auto Reduce on
Receipt
ON
Auto Reduce on
Receipt
OFF
Equal to, or less
than border limit
Automatically
reduces in size
and prints on one
page.
Prints only the
area of the
standard size.
More than
border limit
Prints by splitting with the same ratio.
