2 Fax
80
Fa
x
2
1
Select the [Transmission Options]
tab to display the [Transmission
Options] screen.
2
Select [F Code] on the
[Transmission Options] screen.
3
Select [On].
4
Enter the F Code with the numeric keypad and select [Next].
You can enter up to 20 digits for the F Code.
5
If necessary, enter the password using the numeric keypad and select [Next].
You can enter up to 20 digits for the password.
Remote Relay Broadcast (Performing Relay Broadcast to Remote
Locations)
The Remote Relay Broadcast feature allows you to send documents to multiple
recipients (Broadcast Send) by going through two or more relay stations.
This feature is a more economical option than using the Relay Broadcast feature when
sending documents to the substantial number of recipients, whose machines are
located in remote locations.
Note
• Multiple Relay Broadcast can be performed from a secondary relay station.
There are three Relay Broadcast Send methods.
Fax Signal Method
This method employs a Fuji Xerox proprietary communication procedure that can only
be used with specific machines that have the Relay Broadcast Send feature. The G3
is available.
DTMF Method
G3 fax machines that support Manual Send can make Remote Relay Broadcasts for
the machine.
F Code Method
This method can be used among machines that have the F Code and the Relay
Broadcast Send features. The G3 is available.
Fax Signal Method
Register the following information in the address numbers of initiating stations and relay
stations in advance.
For information on how to register address numbers, refer to "Address Book" (P.124).
