Fuji Electric IGBT-IPM X Series, Руководство по применению

Страница: 34 / 93

MT6M15962a © Fuji Electric Co., Ltd. All rights reserved.
2.5 Others
2-6
Term Symbol Description
Weight W
t
Weight of the IPM
Switching frequency f
sw
Switching frequency that can be input to the control signals input
terminals.
Reverse recovery current I
rr
Peak value of the reverse recovery current. Refer to Figure 2-1.
Reverse bias safe
operating area
RBSOA
The area of voltage and current which the IPM can operate safely
during turn-off. If used outside this area, the IPM may be
destroyed.
Switching loss
E
on
Dissipated switching energy of the IGBT during turn-on
E
off
Dissipated switching energy of the IGBT during turn-off
E
rr
Dissipated switching energy of the FWD during reverse recovery
Input current I
in
Maximum current into the V
in
terminals
Soft shutdown
―
Turn-off operation when protective operation is activated.
(Softer turn-off than normal)
2.4 Noise tolerance
Term Symbol Description
Common mode rectangular
noise
―
Common mode noise tolerance in our test circuit
2.3 Thermal characteristics
Term Symbol Description
Thermal resistance
between junction and
case R
th(j-c)Q
Thermal resistance between the case and IGBT junction.
R
th(j-c)D
Thermal resistance between the case and FWD junction.
Thermal resistance
between case and
heat sink
R
th(c-s)
Thermal resistance between the case and the heat sink, when the
IPM is mounted on a heat sink with the specified torque and thermal
compound.
Case temperature T
c
IPM case temperature
(Temperature of the copper base surface directly under the chip)