MT6M15962a
© Fuji Electric Co., Ltd. All rights reserved.
1-11
Fig.1-6 Package outline drawing(P636)
4.5 P636 package (6in1/7in1 with upper and lower arm alarm signal output)
• The line-up is 50A to 100A for 650V and 25A to 50A for 1200V.
• Terminal pitch of the control terminals is standard 2.54 mm.
• Main terminals are flat type solder pin and the height is the same as the control terminals.
Therefore, it enables to solder the main terminals and control terminals to the same PCB.
• Screw size for the heat sink is M4.
• Two types of protrusions with different heights are provided on the upper surface of the lid. The
height from the base surface to the device control printed board can be selected from 17.0 mm and
18.5 mm. Refer to Figure 1-18.
• The package outline drawing is shown in Figure 1-6.
Note:
1. The dimensions shown in
□
represent the theoretical
dimension.
2. The terminal pitch is the value at the root of the
terminal.
3. Dimensions in ( ) are given only for reference.
4. Terminal plating: Sn (for soldering)
[Unit of dimensions
：
mm]
