MT6M15962a
© Fuji Electric Co., Ltd. All rights reserved.
1-13
Fig.1-8 Package outline drawing (P630)
Note:
1. The dimensions shown in
□
represent the theoretical dimension.
2. The terminal pitch is the value at the root of the terminal.
3. Dimensions in ( ) are given only for reference.
4. Main terminal plating: Ni
Control terminal plating: Ni plating on the ground, Au plating on the
surface. (for connector and soldering use)
5. The guide pins located on both sides of a control terminal are
made of brass.
(They are insulated internally and are not connected to any object.)
[Unit of dimensions
：
mm]
4.7 P630 package (6in1/7in1 with upper and lower arm alarm signal output)
• The line-up is 50A to 250A for 650V and 25A to 150A for 1200V.
• Terminal pitch of the control terminals is standard 2.54 mm and can be connected with general-
purpose connectors and soldering.
Guide pins make it easy to insert connectors for printed circuit boards.
• Main terminals are M4 screws.
• Screw size for the heat sink is M4 common with the main terminals.
• All electrical connections are done with screws and connectors, thus no soldering is required and
easy to remove.
• The package outline drawing is shown in Figure 1-8.
