Fronius RCU 5000i, Инструкция по эксплуатации и запасные части

Страница: 236 / 248

236
Power-corr. limit: High
for presetting the upper power correction limit
(PcH)
Unit [%]
Range -20 - +20
Power-corr. limit: Low
for setting the lower power correction limit
(PcL)
Unit [%]
Range 0 - -20
Power-sharing control
for presetting whether the power-sharing control is to be switched on
or off
(P-C)
Unit -
Range Off/On
Process
for selecting the welding process for the arc
Unit
-
Range Standard/pulse/CMT
Puls_cycles
for setting the pulse cycles for a CMT/pulse characteristic
Unit
-
Range 0 - 500
Pulse correction
for correcting the pulsing range of a pulsed arc
(dYn)
Unit -
Range -5 - +5
Pulse current
characteristic parameter for setting the pulse current (i.e. time according to the base cur-
rent)
Unit
[A]
Range 0 - max.
Pulse current time
time during which the pulse current is active
Unit
[ms]
Range 0 - 50
Pulse frequency
characteristic parameter with CMT Advanced Pulse characteristics for setting the fre-
quency of the pulsed arc
Unit
[Hz]
Range 1.2 - 500
Pulse frequency
characteristic parameter for setting the frequency of the pulsed arc
Unit
[Hz]
Range 2 - 1000
Reaction
for setting the reaction, when Q-Master values are exceeded
Unit
-
Range none/warning/switch-off