Fresenius Medical Care AquaA, Инструкция по эксплуатации

Страница: 240 / 240

Chapter 15: Appendix
240 Fresenius Medical Care AquaA IFU-EN-US 06B-2021
Illustration Description

The permeate must be collected while the system is in
operation (during dialysis) or after extensive rinsing of the
system (see above). Before collecting the sample, rinse the
sampling valve
(A or B) (approx. 2-10 L) .
Caution:
To avoid contamination of the sample by dirty sample
containers, use only the containers supplied by the
laboratory!

When collecting the sample, do not open the sample containers
until directly before collecting the sample and make sure to
close the containers immediately after taking the sample to
prevent contamination.

The sample containers must be filled up to the top.

When collecting a sample the valve must first be sufficiently
rinsed
(approx. 5 L) . Then the sample containers must be filled
from the free flowing jet of water.

When collecting the sample on the media supply column attach
the bag / adapter to the coupling and fix it in place with the latch
(Fig. 2 – B).

Then thoroughly rinse the coupling ( approx. 2 L ) via the rinse
tube.

Fill the sample container via the rinse tube.
Caution:
When collecting a sample at the media supply column
coupling, do not use the bag (with adapter) as a sample
container.
Use the bottles supplied by the laboratory as sample
containers!
Fig. 1 A
Fig. 2
B