35
6.5
Programming an Infusion
6.5.1
Programming an Infusion by Flow Rate
6.5.2
Programming an Infusion by Dose Rate
6.5.2.1
Selecting the Drug Concentration
2.
Press the arrow keys to scroll to the drug’s name, and press
OK
.
A clinical advisory message may appear, if one is configured for the selected
drug.
3.
Press
OK
to acknowledge the clinical advisory message and continue
programming, or
C
to change the drug.
This section describes the programming of an infusion with the
Simple
Rate
infusion mode.
You can also program an infusion with the following modes:
- Volume/Time (or Dose/Time), see section 6.10.2, page 49.
- Volume Limit, see section 6.10.3, page 50.
1.
Press the arrow keys to program the flow rate.
A drug selected from a drug library can allow adjustments of concentration in one
of the following ways:
Within an authorized range
At authorized finite values (up to 5)
If no adjustment on the concentration is allowed, see section 6.5.2.2, page 36.
