26
4.3.3
Using on a Flat Table
4.3.4
Attaching Two Pumps Together
1.
Fold the pole clamp up: see section 4.2.2.2, page 25.
2.
Place the pump far enough from the table's
edges to prevent it from accidentally being
pushed off.
You can attach two pumps together either for transport, or before fixing them to a
pole.
1.
Fold both pumps’ pole clamps up: see section
2.
Slide the slot on the bottom of the upper pump
onto the handle of the lower pump.
3.
Turn the attachment lock knob on the lower
pump handle clockwise until the locked symbol
lines up with the marker.
4.
Make sure the two pumps are securely
attached together.
5.
If needed, fold the two pole clamps down and
secure them tightly to the pole.
Symbol
Location
Description
Attachment Lock Knob
Locked Position
Attachment Lock Knob
Unlocked Position
