48
6.9.2
End of Infusion
6.9.3
Powering off
6.10
Infusion Modes
6.10.1 Simple Rate
When the infusion is complete, the following happens:
An audible alarm is triggered.
An alarm message appears on the pump screen.
The infusion indicator lights flash red.
End of infusion settings are configurable with a compatible DERS (custom
profiles), or in the pump options (Basic Profile). For more information, refer to the
technical manual.
Silencing the Alarm
1.
Press
to silence the alarm.
2.
Prepare a new syringe, and adjust the settings for a new infusion.
You can power off the pump as follows:
1.
Press
to stop the infusion.
2.
Press and hold
until the pump powers off.
You can program an infusion with the different infusion modes available,
depending on the pump configuration, and on the selected drug.
1.
Press the arrow keys to select the infusion rate.
2.
Press
OK
.
For more information, see section 6.5, page 35.
