Freedom R8100 SERIES, Руководство оператора

Страница: 38 / 255

38
Note: If RF Level Offset is enabled, the Mon Port label is cyan-colored indicating that RX measurements
are adjusted by the Mon Port-specific offset. See section
2.2.8.2 for details.
Input Level Units
Selects the measuring units for the RF Zone input level display (“Input Lvl”) via horizontal soft keys.
Choices are Volts, Watts, or dBm.
Direct entry example:
Figures 3.2.1-3 and 3.2.1-4 show the data entry and RF Zone windows after pressing the Monitor
Frequency soft key and entering 501.234567 MHz via the numeric keypad. The data entry window starts
with the left most numeric field highlighted. As the value is entered on the keypad the highlight
automatically steps to the right. Pressing Enter or a units key (MHz, etc) completes the change while Esc
cancels the entry.
Figure 3.2.1-3 Data entry window before and after Monitor frequency change
Figure 3.2.1-4 RF Zone display area after Monitor frequency change
Real time adjustments using the tuning knob and arrow keys.
In many data entry windows the R8100 will respond immediately before the Enter key is pressed if the
Up/Down (▲▼) keys or tuning (spin) knob are used to change the numeric value. An example of this is
the frequency entry adjustment in Monitor mode. Here the operator can use the tuning (spin) knob to