Freedom R8100 SERIES, Руководство оператора

Страница: 207 / 255

207
Note: Visible only when at least one script is enabled with Toggle Selection.
Move Up
Shifts script at selection marker up one row in script list. Any script in row above selected script is shifted
down into selected script’s old row.
Move Down
Shifts script at selection marker down one row in script list. Any script in row below selected script is
shifted up into selected script’s old row.
Copy Script
Duplicates the script at the selection marker into the next row so that it can be run more than once. It may
be moved up or down afterwards. The copy is only a reference to the script file and will not be retained if
the R8100 Power is turned off. However, the duplication may be retained with Save as Procedure.
Note: Visible only when a script exists on the unit’s hard drive.
Load Procedure
Loads and enables scripts saved in a procedure into the script list. Any current script list scripts not part
of the loaded procedure are removed from the script list. Procedures may be imported from an external
USB drive or created using the Save as Procedure soft key. If a loaded procedure references scripts which
have not been imported to the unit’s hard drive, a warning message is given and the procedure is not
loaded. See Figure 2.2.7.11-4 for example submenu after loading a procedure named GENERIC.
Note: Visible only when at least one procedure is present on the unit’s hard drive.