Fona MyCrown Mill, Руководство по обслуживанию

Страница: 6 / 98

6
MyCrown Mill
1.1.
General information
Nominal line voltage ranges The MyCrown Mill milling unit operates in the following nominal line
voltage ranges:
● 100V - 230VAC; 50 / 60 Hz
Wireless phone interference with
medical electrical equipment
ESD warning label
ESD protective measures
ESD protective measures include:
● Procedures for preventing electrostatic charge build-up (e.g. air
conditioning, air moistening, conductive floor coverings and non-
synthetic clothing)
● Discharging the electrostatic charges of your own body on the frame
of the UNIT, the protective ground wire or large metallic objects
● Connecting yourself to ground using a wrist band.
Measurements Always switch off the device before connecting the measuring instrument.
Select the correct current/voltage type and adjust the measuring range to
match the expected readings.
Perform continuity tests only on devices which are switched off.
NOTICE
To ensure safe operation of medical electrical equipment, the use of
mobile wireless phones in practice or hospital environments is
prohibited.
CAUTION
Risk of injury or damage to components from electrostatic discharge
For electrical components labeled with an ESD warning label, observe
the following instructions.
➢ Apply the ESD protective measures.
➢ Do not touch connector pins or sockets without applying ESD
protective measures first.
➢ Do not establish any connections between these connectors without
applying ESD protective measures first.