33
32
Battery charge level check
1
2
1 LED battery charge indicator
Shows .the .e-bike .battery’s .remaining .charge.
2 Control button for battery charge level
Let .the .LED .battery .charge .level .indicator .blink .to .
verify .the .remaining .battery .power.
3 Charger connector
4 Rubber cap
Protects the charger connectors when the battery
is .not .being .charged.
To check if the battery is charging, press the con
-
trol button on the battery to be shown the charge
level.
Charge .the .battery .when .not .all .of .the .five .charge .
indicator . LEDs . light . up. . Only . use . the . original .
charger.
Never .use .chargers .supplied .by .third-party .com-
panies.
A .fast-flashing .LED .indicates .that .the .battery .has .
been .completely .discharged.
Removing the battery
1. .Switch .off .the .electrical .system .first. .To .do .this, .
press .the .on/off .button .on .the .display.
2. .Unlock .the .battery .with .the .battery .key .and .re-
move .it .from .the .holder. .Hold .the .battery .firmly, .
as .it .is .heavy.
Charging the battery
The battery can be charged while it is installed in
the .e-bike .or .once .it .has .been .removed.
Safety warning for the battery charger
The name plate on the charger refers to warning
notes and other safety information in connection
with . handling . the . charger. . Be . sure . to . read . this .
before .use.
Use .only .the .original .Panasonic .charger .
supplied . along . with . your . e-bike. . Only .
this charger is designed for the lithi
-
um-ion .battery .used .on .your .e-bike.
Completely charge the battery using the
charger .before .the .first .ride .to .ensure .full .
battery .performance. . Read . and . adhere .
to the operating instructions for the
charger .when .charging .the .battery.
The battery can at any time be charged outside
or installed in the bicycle without reducing its life
span. .Interrupting .the .charging .process .does .not .
damage .the .battery.
The .battery .is .equipped .with .a .temperature .mon-
itor that permits charging only within a tempera
-
ture . range . of . 0 . °C . to . 40 . °C. . If . the . battery . tem-
perature .is .too .high, .the .battery .will .not .charge. .
In .addition, .if .you .press .the .control .button .for .the .
LED .battery .charge .level,
the . LED . at . the . very . top . [F] . and . bottom . [E] . will .
blink.
In .this .case, .separate .the .battery .from .the .charger .
and wait until it has reached operating tempera
-
ture. . Only . reconnect . the . charger . when . it . has .
reached .the .permitted .operating .temperature.
The charger itself can also indicate problems via
the .red .LED .flashing.
Blinking
pattern of
charger LED
Description
Action
Blinking red
Charging er-
ror
An .error .has .
occurred in
the battery
or .charger. .
Charging
cannot be
continued.
Remove any
dirt from the
terminals and
plugs. .If .the .
problem per
-
sists, contact
your .FLYER .
specialist
retailer.
