Flexball Italiana S.r.l.
12
4. Command station
Command stations are classified as devices for the control of one or two engines, with or without trim/flap
command. After serial number 18500 there can be mounted in the same installation an unlimited number of
command stations, before serial number 18500 the number of command stations in the same installation is
limited to 3; for detailed information look at section 7.7.
Depending on the application, it is very important to set the dip-switches present on the bottom part of the
command station, as described in sections 4.4 and 7.6 of this manual.
How to mount the Command Station
Command stations cannot be directly or indirectly mounted onto sources of vibrations. At chapter 23 of this
manual you find the drilling mask schemes.
4.1. Dimensions
4.1.1. Command station series 3500
►
Important:
in case the screws to fix command station to the dashboard panel are not long enough, don’t
open the command station to replace them but ask for an adaptation kit.