manualshive.com logo in svg

Fisher FERITSCOPE FMP30, Руководство оператора

Поделиться
Скачать
Fisher FERITSCOPE FMP30 Скачать руководство пользователя страница 110

Operator‘s Manual FERITSCOPE

®

 FMP30

Page 105

Measuring

7.7

Measurements in the Free-Running Display Mode 

When making measurements in the “free-running” display mode, the 

-fer-

rite content distribution across the surface can be determined simply by 
moving the probe along the surface. With the “free-running” display mode,

the readings are displayed continuously, and

the readings are not accepted and stored automatically,

the date are output continuously via the interface port only if [Free-run-
ning transmit on] has been selected from the Service functions.

As long as the “free-running” mode is on, measurement acquisition can 
be triggered using 

ENTER

.

ENTER

Use 

ENTER

 to end the block result display. 

The last block will be closed automatically 
and a new block will open. If additional 
measurements are to be made in the last not 
yet closed block, do not press 

ENTER

; in-

stead, select the still open block and press 
the arrow 

.

The instrument is again ready to make mea-
surements.

Measurements that are outside the measurement range, e.g., when the 
probe is lifted off the surface, are also output to the interface port.

Key sequ. / 
Action

Detail of the display Explanation

Содержание FERITSCOPE FMP30


















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды