Fiori DB 260, Руководство по эксплуатации и обслуживанию

Страница: 94 / 226

94
4
OPERATION AND USE
id.: DB 260 REV. 00 01/07/2015
4.9 PRECAUTIONS IN THE EVENT OF LONG PERIODS OF INACTIVITY
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
4.10 WORKING PHASES
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
It is essential that the operator becomes familiar with all the controls and, for a fi rst period of time, practices
in a relatively isolated area where he will freely perform all the manoeuvres and operations, which will soon
become routine operations by regularly using the vehicle.
This chapter analyses all the working phases that should be carried out in sequence, in order to obtain optimal
vehicle performance and comply with all the safety regulations.
1 - Before getting on the vehicle (checks and warnings).
2 - Correct use of the vehicle on slopes
3 - First fi lling with mixing water
4 - Cement loading
5 - Aggregate loading
6 - Mixing and second fi lling with mixing water
7 - Concrete unloading
8 - Bucket, drum and chute washing
CAUTION: During road transfer, the driving post must face forward.
CAUTION: Always fasten the seatbelts.
In order to protect the chrome-plated parts against atmospheric agents during long periods of inactivity, take
some basic precautions.
- Vehicles that remain outdoors, e.g. on a yard, for long periods of time must be parked with the loader
lowered; the rods can also be protected with external guards 1 .
If the vehicle is not to be used for a long period of time, follow the instructions below.
- Clean the vehicle and lubricate it through the grease nipples.
- Remove the battery, store it in a warm place and recharge it at least once a month.
- Protect the jack rods with grease to prevent encrustations and corrosion.
- Empty the water tanks and the transfer pump as described in the paragraph above.
- Position the vehicle in a sheltered place and/or cover it with a waterproof sheet.
- Do not leave biodesel (where used) inside the engine supply circuit.
- To keep the engine lubricated, let it run for at least 20 minutes no less than once a week.
CAUTION: For more information, contact an AUTHORISED FIORI WORKSHOP.
29
1