manualshive.com logo in svg

Fiori DB 260, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Fiori DB 260 Скачать руководство пользователя страница 113

113

5

MAINTENANCE

id.:

DB 260      REV. 00     01/07/2015

5.1.3  CHECKING FOR DAMAGES

- Check that all the pins are properly in place and well secured with the respective stops.

- Check the light and signalling devices.

- Check the tyres for sharp or cutting objects.

- Check that all the adhesive safety labels are in place and undamaged. Replace them if necessary.

Seatbelt

CAUTION: Replace the seatbelt if worn or damaged following an accident.

-  Check that the seatbelt is not frayed or stretched.

-  Check that the buckles are intact and working.

-  Check that the fastening screws are properly fi tted and tightened.

ROPS & FOPS structures

Modifi ed or improperly repaired ROPS/FOPS structures are dangerous. Do not 
repair them following an accident and do not use the vehicle until the structure 
has been checked and repaired by qualifi ed personnel.  The vehicle may not be 
used without the ROPS structure.

-  Check the structure for mechanical damage.

-  Check that the retaining screws are all in place, well fi tted and properly tightened.

DANGER:

5.1.4.1 PARTS CONTAINED IN THE TOOL KIT

5.1.4  ACCESS TO THE MAIN DEVICES

1

 - no.1 double fork wrench 10 - 13 

2

 - no.1 double fork wrench 17 - 19

3

 - no.1 double fork wrench 24 - 27

4

 - no.1 oil fi lter wrench 

5

 - no.1 M18 T-wrench

6

 - no.1 fl at-blade/cross-slotted screwdriver

7

 - no.1 manual grease pump

5

6

7

4

1

2

3

Содержание DB 260



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды