manualshive.com logo in svg

Fiori DB 260, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Fiori DB 260 Скачать руководство пользователя страница 108

108

4

OPERATION AND USE

id.:

DB 260      REV. 00      01/07/2015

4.10.10.  BUCKET, DRUM AND CHUTE WASHING

 (fi g. 43)

CAUTION: The washing operations can be carried out both with the nozzle provided (pressure of 4.5 

bar) and with an optional nozzle operating at a pressure of around 150 bar.

-  Set the drum to rotate clockwise like for mixing.

-  Fill the drum with  water and gravel following the procedures as described above (chapter 4.10.5) in a 

quantity suffi cient to dilute and detach the  concrete residues.

- Connect the washing nozzle  

G

 to the pump delivery.

  Set the switching valve 

B

 to position “

2

”

-  Externally wash the bucket, drum and chute as well as all the parts normally soiled with concrete.

-  Raise the drum.

-  Change drum rotation from clockwise to anticlockwise.

- Drain out all the water in the drum and wash the chute and the extensions.

-  Remove the extensions.

-  Lower the bucket and wash it inside and out.

43

G

B

2

Содержание DB 260



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды