42
3
SAFETY PRECAUTIONS
id.:
DB 260 REV. 00 01/07/2015
3.3 PRECAUTIONS DURING MAINTENANCE OPERATIONS
Before using or carrying out any operation on the vehicle always do the following:
- Carefully read all the instructions contained in this manual.
- Always read the labels and the instructions on the vehicle and in the manual before starting any operation on
the vehicle. The instructions contain important information (see the chapter “Safety Labels”).
- Repairs and maintenance on the vehicle may only be carried out by authorised persons. Do not allow
unauthorised persons to access the area. If necessary, have someone stand guard in the area.
- Before carrying out any operation, apply all the special safety devices.
- First of all, check that the maintenance operations have meticulously been carried out at the intervals
established.
- Always wear suitable protective clothing and any other protection required for the operation to be carried out.
- Do not leave hammers or other tools lying around in the working area. Remove any traces of grease, oil
or other substances that might cause someone to slip. Always keep the workplace clean and tidy so that
you can carry out all the operations in complete safety. If the workplace is dirty and untidy, there is a risk of
tripping, slipping, falling and being injured.
- Check that all the tools provided are in good condition. Do not under any circumstances use tools with upset
heads and always wear protective goggles.
- Always keep the vehicle clean to prevent the formation of dirt and oil encrustations. This also reduces the risk
of fi re and makes it easier to identify damaged components and detached parts.
- Do not lubricate or repair the vehicle when the engine is running, except where expressly indicated in this
manual.
- Do not allow anyone to tamper with the danger signs or make them illegible.
- Do not use parts of the vehicle, such as handholds or supports, to carry out the operations.
- Absolutely do not use matches, lighters, torches or open fl ames to illuminate dark areas.
- Use lights or lamps (vehicle and auxiliary lights) positioning them in such a way that other persons working
in the area are not blinded.
ROUTINE MAINTENANCE
- Always lower the equipment to the ground and release the hydraulic pressure from all the circuits before
starting to carry out maintenance on the vehicle.
- Connect all the safety devices on the vehicle and remove the ignition key.
- Depending on the type of maintenance to be carried out, disconnect the battery master switch and hang a
sign on the driver’s seat saying that maintenance is in progress.
EXTRAORDINARY MAINTENANCE
- Do not keep the engine running in closed spaces without adequate ventilation.
- Keep your head, body, limbs and hands away from moving and/or raised equipment.
- Do not remove any safety devices, lids, covers or guards if not for maintenance reasons.
If they need to be removed, be extremely careful and refi t them before using the vehicle.
- If during maintenance you need to move the equipment using the hydraulic control, operate as follows:
- Before starting the engine, warn everyone in the vicinity to move away from the vehicle.
- Operate seated on the driver’s seat and never use the controls if not seated on the driver’s seat.
- Engage the parking brake.
- Signal when you are about to make a manoeuvre by voice and sounding the horn
- Manoeuvre slowly
- Always lock the arms or the parts that need to remain raised during the operation using external devices.
3.3.1 CORRECT MAINTENANCE
CAUTION: Do not tamper with the setting of the devices for control of the hydraulic and electrical
circuits.
Содержание DB 260
