6 MAINTENANCE
DANGER
!
All maintenance work or the replacement of accessories must be carried out in areas with
adequate lighting and only after having disconnected the machine from the power supply by
unplugging the battery connector.
NOTE:
All work on the electrical system and all maintenance and repair work (especially work not specifically
described in this manual) should only be carried out at authorised service centres or by skilled
personnel with experience in the field and knowledge of the relevant safety regulations.
Carrying out regular maintenance on the machine, carefully following the manufacturer’s instructions
ensures better performance and a longer machine service life.
6.1 TANKS
Drain the two tanks as described in the relative sections
Errore. L'origine riferimento non è stata trovata.
and
Errore. L'origine riferimento non è stata trovata.
.
Remove any solid dirt by filling and draining the tanks until all dirt has been eliminated.
Do this using a hose or similar item and only wash the inside of the tank.
CAUTION
Water temperatures in excess of 50°, high-pressure washers or excessively powerful sprays
can damage the tanks and the machine.
Leave the plugs of the tanks open (only while the machine is not being used) so that the tanks
can dry and prevent the formation of unpleasant odours.
6.2 DETERGENT SOLUTION TANK FILTER
1) To clean the detergent solution filter, remove the
plug
1
and the filter element
2
.
2) After cleaning, place the filter element
2
back into
its seat and screw the plug back on
1
.
6.3 SUCTION HOSE
1) Disconnect the suction hose
1
from the squeegee
2
.
2) The hose
1
can now be cleaned and any
obstructions removed.
3) After cleaning, insert the hose
1
firmly onto the
squeegee body
2
.
