5.4 MOVING THE MACHINE
To move the machine when not in operation, proceed as follows:
1) Switch the machine off using the main switch on the control panel.
2) Lock the handle using the locking lever.
3) Raise the squeegee using the appropriate lever.
4) Grip the handle and using it as a lever to lift the front of the machine,
rotate it (
A
) backwards until it is resting completely on its wheels.
5) Keeping the machine in this position, push it to where it needs to be
used or stored.
CAUTION
Do not use the wheels to support the machine when moving it up or down flights of stairs. It
should be lifted (it requires at least 2 people) using the carrying handle.
5.5 FITTING AND REMOVING THE SQUEEGEE
Assembly procedure:
1) Position the squeegee support 1 so that it is facing upwards A
2) Insert the squeegee
2
onto the holes
X
in the support
1
.
3) Tighten the knobs 3 securely to fasten the squeegee
2
to the support
1
.
4) Insert the suction hose
4
into the sleeve
5
.
Removal procedure:
1) Position the squeegee support 1 so that it is facing upwards A
2) Disconnect the suction hose 4 from the sleeve
5
.
3) Loosen the knobs
3
that fasten the squeegee
2
to the support
1
.
4) Remove the squeegee
2
.
