6.4 SQUEEGEE
CAUTION
Do not handle the squeegee with bare hands: wear gloves and any other protective clothing
that may be necessary.
Remove the squeegee from the machine and clean it under running water using a sponge or brush.
Check the effectiveness and the wear of the rubber blades that are in contact with the floor.
They are designed to scrape the detergent-water film on the floor and to isolate that area of the surface to help the
vacuum motor reach the maximum vacuum pressure: this ensures that the machine will dry the floor completely.
Working like this continuously causes the sharp edge of the blade to become round or to wear, thereby reducing its
drying efficiency. The squeegee blades must therefore be replaced fairly often.
If necessary, turn the blades in order to use the other sharp edges or to install new ones (see section
Errore.
L'origine riferimento non è stata trovata.
).
6.5 VACUUM FILTER
1) Release the fastening clips
1
2) Remove the tank
2
3) Remove the filter
3
from its seat and clean it under running water.
4) After cleaning, replace the filter
3
in its seat
5) Put the tank
2
back into the handle.
6.6 ACCESSORIES
Remove and clean the brush or pad driver (see section
Errore. L'origine riferimento non è stata trovata.
).
Check that the brushes work evenly on the surface (check for any irregular wear on the brushes or abrasive disks).
CAUTION
To avoid damaging the floor and the machine, make sure that no foreign objects, such as
metallic parts, screws, chippings, string or similar items, have become caught in the brushes.
NOTE:
Only use accessories recommended by the manufacturer:
Using products that are non-compliant may affect safety and damage the machine.
