5.9 OPERATING THE MACHINE
1) Check that all the switches (
1
,
2
and
3
) on the control panel
A
are in the
O
position.
2) Lower the squeegee.
3) Lift the lever
4
to release the handle
5
.
4) Switch on (position
) the machine using the ON/OFF
switch
1
(the LED
6
lights up).
5) Start the brushes and the dispensing of the solution (water
+ detergent) using switch
2
(position
).
6) Turn on the vacuum using the switch
3
(position
).
7) Wash the floor by moving slowly forwards and follow the
machine as it progresses due to the movement of the
brushes.
CAUTION
Remember to raise the squeegee before reversing in order to avoid damaging it.
NOTE:
The machine is fitted with a motor overload protection system that stops the motor in the event that the
ON/OFF switch is pressed repeatedly at short intervals.
The machine must be restarted in order to resume normal operation.
